From collectables to cars, buy and sell all kinds of items on eBayG'day! Sign in or register
aAdvanced Search

Guides

Write a guide

BurnInTest FAQ - Testing for fake counterfeit USB drive

by: blueskies2810( 1883Feedback score is 1000 to 4,999) Top 1000 Reviewer
2 out of 2 people found this guide helpful.
Guide viewed: 370 times Tags: ScanDisk | Kingston | USB | Flash | Drive


Using BurnInTest you can actually test whether your USB flash drive has the amount of storage it claims or not, and test the ability of the drive to store and retieve data without corruption. BurnInTest can be used to write, read and verify large amounts of data to and from the drive, detecting oversize capacity and poor quality drives in the process. This process assume you already have a licensed version of the the BurnInTest software. (You can use the eval edition of BurnInTest, but the eval edition is limited to 15min runs which might not be not run long enough to test large drives)

Step 1

Check that Windows Properties shows that the drive has the size stated. From Explorer, navigate to the USB drive and right-click properties and check the Capacity shown. This should (approximately) match the stated drive capacity, which is usually printed on the outside of the drive, and / or on the box.

Step 2

Use BurnInTest with the following settings to test that the storage is really there. In Configuration->Test Duty Cycles, select the Disk test, set Disk Duty cycle to 100%, duration to 0 (or a long period of time) and set number of cycles to at least 100. Turn all other tests off.



Step 3

In Configuration->Preferences->Disk, select the USB drive to be tested, set the File size to be 1% and the block size to the maximum (currently 1024KB).

Step 4

Run BurnInTest. If the drive does not have the stated capacity then BurnInTest will report an error. In the cases we have seen, a "Data Verify failure" will be displayed. While it looks like the drive has the stated capacity in Windows Explorer, in the cases we have seem, the drives simply use a repeat of a 512 Byte block of previous real data for files where there is no 'real' storage space.

In the small test window you can see how much of the drive capacity has been tested and the current speed. Check that the entire drive capacity gets tested and check the speed is reasonable. Newer USB2.0 drives should peak above 5MB/sec.

 

This test approach also applies to fake oversize SD cards, fake oversize Compact Flash cards and other similar memory devices.


Guide ID: 10000000007252996Guide created: 23/05/08 (updated 11/09/08)

 
Was this guide helpful? Report this guide

Ready to share your knowledge with others? Write a guide




About eBay | Announcements | Register | Security Centre | Feedback Forum | Site Map | Policies | Help | Contact Us | Advertise
Copyright © 1995-2008 eBay Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.
eBay official time